Your benefits at a glance
Thermal Inkjet Technology for porous and non porous surfaces
- fast drying inks for plastics, metal, coated and varnished carton...
- Drying time < 2 sec
One controller - up to 4 different applications
- simultaneous printing on up to 4 production lines
- different messages, inks, production speed...
No repairs, zero maintenance
- ink cartridge system without wearing parts
- no downtime
- no repair costs
Clean and easy operation
- only environmentally responsable inks
- no need for disposal
- ink cartridge change in a few seconds
Unlimited print possibilities
- a superior print quality
- logos, 1 and 2D barcodes, special characters
- resolution up to 600 dpi
- print height from 0.28 bis 50.8 mm
- printing speed up to 300 m/min
Low running costs
- uses only ink, no solvent
- no repair or part costs
|
Testimonials
» Comparing the downtime of the previous solution with the low cost of the new equipment, we certainly have our issues settled in less than two months.«
Egon Marin, Technical Plant Manager Parador, Güssing
» The ability to change the cartridge as easily as that of one’s printer at home is a real advantage.«
Pierre-Etienne Longeret, Production Manager Le Dauphin, Drôme
» With the previous CIJ printers, the ink spread out like a mist on the assembly lines and contaminated them with colour particles. Today, the colour comes out only at the head.«
Dr. Stephan Wurtz, Production Manager GSK, Herrenberg
» Thanks to the reduced time requirements and lower costs we now have more capacities to fulfill the increasing demand in the market.«
Hans-Joachim Finke, Plant Manager VMZ, Berlin
» We needed a user friendly printer that could be relied on to print a good quality message. On top of the production beenfits I feel that I have been given excellent value for money.«
Phillip Ta, General Manager ABC Tissue Products, NZ
» It takes 2 minutes to start it up, 30 seconds to switch off, and they do not require any maintenance. And since first use, we have experienced no breakdown. It is really a zero-fault machine, like chalk and cheese when compared with what we knew before.«
Guy Laneurit, Maintenance Manager at CGP Industries
» For us, ease of use of the aps apsolute printers is the major advantage. In a small and medium-sized firm like ours, we cannot be equipped with all the skills. We have a person specialist of this hardware, but who cannot be sought at any time. Thanks to the simplicity of use, operators are able to work independently without being dependent on technical problems.«
Eric Lepagney, Production Manager at Bio Planete, France
|